4204
FLOW METER
TECHNICAL MANUAL P/N XXX-0000 Rev. 5 Ver. 3.4
44
10 WARRANTY
Chemitec s.r.l. will replace or repair at its own sole option, those parts that may eventually manifest
defects in manufacturing or operating, despite of a diligent and proper use by the customer.
The defective product, or considered such, must be sent free of charge to the Chemitec Factory, via
I.Newton 28, 50018 Scandicci, Florence (Italy) and will be returned, after the reparation, at
purchaser’s expense. In order to activate the warranty, a detailed written request should be sent to
Chemitec s.r.l., specifying failures or disruptions complained within 12 (twelve) months from the
date of installation with a maximum of 18 (eighteen) months from date of shipment.
Are excluded from the warranty, then at purchaser’s charge, the costs of performance of our staff for
operations offsite, except the hours of work. The travel’s time and expenses, meals, etc. will be
charged according to ANIE rates.
Components subject of natural wear and glass-parts are excluded from the warranty. The warranty
lapses only if the equipment were manipulated by someone not belonging to our company or
without our explicit authorization.
THE EQUIPMENT ‘S TESTING IS PERFORMED AT THE CHEMITEC SRL COMPANY OF
SCANDICCI (FI).
MODELLO/MODEL
NUMERO DI SERIE/SERIAL NUMBER
TESTING DATE
NOTE:
CHEMITEC SRL
____________________
To Next Page
Loading...
