Chemtrac SCM2500XRD User Manual

Chemtrac Systems, Inc. Page 39
3.10 TUNING CONSTANT SPECIFICATIONS
Tuning constants are stored digitally in non-volatile memory and can be changed by
front panel keys. Table below shows default PID Parameters preset by Chemtrac
®
.
PID Tuning Parameters Default Setting
Proportional Band 150
Integral Time 60
PID Rate 1
Experience has shown these values to be a good starting point for most applications.
However, significant changes may be necessary to tune the controller to your specific
operation.

Chemtrac SCM2500XRD Specifications

General

Brand	Chemtrac
Model	SCM2500XRD
Category	Controller
Language	English