Chemtrac Systems, Inc.
Page 4
IMPORTANT INSTRUCTIONS
When using this instrument, basic safety precautions shall always be followed to
reduce the risk of fire, electrical shocks and injury to persons, including the
following:
R Before attempting to unpack, set up, or operate this instrument, please
read this entire manual.
R Make certain the unit is disconnected from the power source before
attempting to service or remove any component.
R Follow all warnings and marked on the instrument.
R Failure to follow these precautions could result in personal injury or
damage to the equipment.
R Do not attempt to disassemble the unit.
R Water must not be allowed to enter the housing of the unit.
R Close and fasten the covers of the unit prior to any external cleaning to
prevent water ingress.
R Do not drop or jar the unit.
R Do not modify any internal electrical wiring or electronics.
R Use a mild non-abrasive cleanser when cleaning the outer cover of the
unit.
SAFETY PRECAUTIONS
In order to provide maximum user safety this instrument was designed with all electrical
circuitry enclosed within a protective non-conductive housing. The label below will be
visible at any location where high voltage is present.
To Next Page
Loading...
Need help?
General