We must perform the responsibility and obligation
we bear for the environmental protection. The
proper use of car and the legal disposal of cleaning
articles and lubricating materials are significant
steps for achieving this goal. The information with
respect to such an aspect is highlighted by a
tree-shape symbol.
Running-in of New Car
Owing to the machining and assembly errors,
the fictions between active components of a new
car at the beginning of use are always much
greater than those under the normal conditions.
Since the initial running-in effect significantly
influences the service life, working reliability and
economy of a car, the running-in rules shall be
strictly abided by in the event of using a new car.
Rules for Running-in within
1,000km
● It is absolutely forbidden to drive the car at its
full speed;
● Generally, it is forbidden to drive the car at a
speed over 100km/h;
● It is required to the avoid driving the car at its
top speed despite various gears.
Rules for Running-in from 1,000km
to 1,500km
● It is allowable to accelerate till the top speed
or drive the car with the maximum tolerable
engine speed.
Precautions after Running-in
Maturity
For a running car equipped with an engine
speedometer, the tolerable maximum short-time
engine speed is 6,000r/min. No later has the
speedometer finger pointed to the red indication
area than the gearshift lever shall be pulled to the
adjacent higher gear, provided that gear shifting is
going to be done manually.
Check on New Car
Before deliver the car to you, the dealer under
Chery has implemented the vehicle check
according to Chery’s rules. The dealer shall fill in
the “delivery check certification” of this manual with
the date of delivery, and press the certification with
an official seal of sales unit.
The sales unit shall refer to the Chery Car Sale &
Delivery Sheet to check the performance of
complete car in the presence of customer and
introduce the general knowledge of vehicle use to
the customer. The sheet shall be signed by both
the seller and the customer.
It is required to prevent the engine from running at
an unnecessary high speed. Shifting the lever to
higher gears as soon as possible is helpful for
saving fuel, reducing working noise and abating
environmental pollution.