1 General
1.1 About this manual
This manual is for controllers with software version 0.36
When operating the controller, always follow the precautionary instructions
related to each component as well as the regulations and recommendations
given by the local authorities.
The controller must be installed, operated, and maintained by a professional and
in such a way that it does not cause danger to humans, the environment, or the
controller itself. The controller must not be used for other than its intended
purposes without a written consent from the manufacturer.
NOTICE
Before you start to install or operate the system, read this manual carefully
and familiarize yourself with all of the instructions.
Keep the manual for later reference.
1.2 Guarantee
The guarantee for this controller is based on Chiller Oy’s terms of guarantee.
The guarantee becomes void, if:
• the product is modified or repaired without a written consent from Chiller Oy
• the controller parameters are modified without permission
• the configuration of the controller is changed
• the installation site, controller connections, or installation procedures do not
follow these instructions
• the instructions in this manual are not followed.
The guarantee does not cover damages, if:
• the user does not follow the manufacturer’s instructions
• the controller is used in a way that it is not designed for and that causes
damage to the controller.
Note! Warranty claims are processed only, if the complete type and serial numbers
of the units connected to the controller are notified to the manufacturer in written
form.
1.3 Inspection of the controller
The controllers are shipped from the factory as assembled and tested.
When you receive the controller:
1. Inspect the delivery against the order.
2. Verify that the contents of the delivery meet the order.
Copyright © 2021. All rights reserved.
5 (37)
N03104128 Rev. A VariPro Room controller – Installation and Operation Manual
To Next Page
Loading...