NVF5 Series User Manual Chapter 1 Safety Information
Chapter 1 Safety Information
Before conducting transfer, installation, running and maintenance, please read the
user manual carefully and conform to all safety guidelines for the application. Failue to
comply may result in personal injury and/or equipment damage or even death of people.
In the event of personal injury and equipment damage caused by noncompliance with
the safety guidelines by you or your clients, Chint can not assume any responsibility.
1.1 Safety Definition
1.2 Safety Precautions
1.2.1 Before installation
Attention
Installation is not allowed in case that the nameplate is inconsistent with your order
requirements!
Installation is not allowed in case that material
objects are inconsistent with the packing
list!
1.2.2 Installation
Danger
Installation must be conducted by qualified personnel in case of the danger of electric
shock!
Please install the inverter on the metal equipmen(supplementary enclosure) or
non-combustible objects in case of the danger of fire!
It is not permitted to place combustibles nearby in case of the danger of fire!
The products should be installed with either fuses or an input circuit breaker between
the inverter and power supply in case of danger of fire!
The occasion where death or serious injury may be caused by the
mis-operation.
The occasion where intermediate or slight injury or property damage may be
caused by mis-operation.
In case of a damaged inverter or components lack, it is not suggested to conduct
installation or running; otherwise, the danger of fire or injury may be caused!
It is not allowed to contact with the power terminals, the control circuit terminals
,
electronic parts and components of the inverter by hand directly!
- 1 -
To Next Page
Loading...
