4.6 Button Combinations
CONNECT and INFO = Base Unit Details
+
Press and hold the Connect and Info buttons at the same time, for three (3) seconds. SEVEN will announce
the configuration version (typically this is ‘standard’), and then announce the account number (CSID) that is
assigned to the base unit so it can be uniquely identified.
CONNECT and INFO and CANCEL = Installer Setup
+ +
To access the Installer Setup, press and hold the Connect, Info, and Cancel buttons at the same time, for
three (3) seconds.
SEVEN will announce, “Installer Setup” followed by the first option in the menu. The Installer Menu options
available are determined by the configuration file applied to SEVEN. These options have been preselected by
your organisation, so some Installer Menu options may not be available to select. See Section 8, Installer
Setup Menu, for more information.
To Next Page
Loading...
