Disarming the Broadcaster Broadcaster
10
MT2461A
Land Line Modem Setup
1.From the Current Conditions screen, press the Back Button.
2.Select Setup from the Main Menu.
3.Select General.
4.Scroll down to Land Modem Config and select.
5.Select Land Modem Setup and press select.
6.The current installed Land Modem will be displayed. Press the 1 and 7 Button to save.
Checking Cell Signal
1.From the Current Conditions screen press the Back Button. Select Setup from the Main Menu.
2.Select General from the Setup Menu.
3.Scroll down to Cell Modem Config and Select.
4.Select Cell Signal.
5.The Signal shown is only an example.