Chore-Time Broadcaster - General Information; Introduction; Broadcaster Features; Connection to Chore-Tronics 3 Control

General Information Broadcaster
6
MT2461A
The Chore-Time Broadcaster is designed to be used to send notifications via Landlines or Mobile device. Using
the equipment for purposes other than specified in this manual may cause personal injury and/or damage to the
equipment.
Broadcaster
™
Features
•Alert system provides notifications to: Landline via voice, Cellphones via voice and Cellphones via
text.
•Passes along alert notifications from Chore-Tronics
®
to user.
•Add and name up to 8 alert inputs (Subject to system limitations)
•Notify list can be up to 10 numbers
•List can consist of:
-Voice calls to a landline.
-Voice calls to a cell phone.
-SMS (text) message to a cell phone.
•Voice calls can be made on a landline or via the optional cellular modem
•SMS messages sent via cellular modem only
• The Broadcaster
™
will notify each number in the list, in order until acknowledgment code is entered.
•If SMS messaging is used, all phones that have been sent a message will be sent an additional message
informing which number acknowledged the alert.
Connection to Chore-Tronics
®
3 Control
•The Chore-Tronics
®
3 Main Control connects to the Broadcaster
™
using Ethernet via: Traditional Cat5e
cable, Fiber Optic Cable and or Wireless Ethernet Radios.
•Will pass on alerts from the Chore-Tronics 3 to the user.
•Maximum of 20 controls can be connected to the Broadcaster
™
.
•Broadcaster will alert user if communication is lost between the Chore-Tronics
®
3 and the Broadcaster.
•Eight alert inputs are available on the Broadcaster
™
Main Box. If more than 8 inputs are required, then
the optional Auxiliary box is used. Each Auxiliary box will add an additional 8 alert inputs.
•Put an Auxiliary box with every house to give 8 alert inputs per house!
•Broadcaster
™
will alert user if communication is lost between the main box and auxiliary box.
General Information
Introduction