Chore-Time FLEX-AUGER 108 Installation Manual

Model 108 FLEX-AUGER Installation Manual
( 3 )
Support Information
(CE-mark serial number)
The Chore-Time FLEX-AUGER Feed Delivery System is designed to convey poultry and
livestock feed types. Using this equipment for any other purpose or in a way not within the
operating recommendations specified in this manual will void the warranty and may cause
personal injury and/or death.
This manual is designed to provide comprehensive planning,
installation, wiring, operation, and parts listing information.
The Table of Contents provides a convenient overview of the
information in this manual. The Table of Contents also
specifies which pages contain information for the distributor,
installer, and consumer (end user).
Chore-Time Equipment recognizes CE Mark and pursues
compliance in all applicable products. Fill in the CE-Mark
serial number in the blank space provided for future reference.
Fill in the following information about your FLEX-AUGER Feed Delivery System. Keep
this manual in a clean, dry place for future reference.
Distributor’s Name
Distributor’s Address
Distributor’s Phone Date of Purchase
Installer’s Name
Installer’s Address
Installer’s Phone Date of Installation
System Specifications
Feed Delivery System Supplying
Tools needed to install your
Model 108 Flex-Auger System include:
1. Regular Screwdriver
2. Allen Wrenches
3. Box-End Wrenches
4. Drive Ratchet and Sockets
5. Locking Pliers
6. File
7. Saw to cut PVC Tubes
8. 3.5" Hole Saw or Sabre Saw
9. Screw-Hook Driver
10. Bolt Cutters or Hack Saw
11. PVC Cleaning Solvent
12. Wire Cutters
13. Wire Strippers
14. Adequate Size and Quantity of Electrical Wire
15. Electrical Drill and Drill Bits
16. Abrasive Cut-off Saw (for steel systems only)
17. Oxy-Acetylene Torch and Brazing Rod
18. Another person to help!!

Chore-Time FLEX-AUGER 108 Specifications

General

Brand	Chore-Time
Model	FLEX-AUGER 108
Category	Industrial Equipment
Language	English