You can set-up notifications for your account to receive an email or text (SMS) message every
time a command is sent. Login to Mopar Owner Connect moparownerconnect.com and click on
Edit Profile to manage Uconnect Notifications.
Remote Horn And Lights — It’s easy to locate a vehicle in a dark, crowded or noisy parking area
by activating the horn and lights. It may also help if you need to draw attention to your vehicle for
any reason. You can send a request to your vehicle in one of three ways:
1. Using the Uconnect Access App from a compatible device.
2. From the Mopar Owner Connect website.
3. By contacting the Uconnect Care on the phone.
To use this feature after the Uconnect Access App is downloaded, login using your user name and
password. You will need your four digit Uconnect Security PIN to confirm the request. You can
set-up notifications for your account to receive an email or text (SMS) message every time a
command is sent. Login to Mopar Owner Connect moparownerconnect.com and click on Edit
Profile to manage Uconnect Notifications.
Voice Texting — Want to dictate a personal message? Register with Uconnect Access to take
advantage of a new, cloudbased Voice Texting service, an enhancement to Voice Text Reply.
Voice Texting allows you to compose a new text or reply to an incoming text message. Before you
attempt to use the Voice Texting feature, check to ensure you have the following:
1. A paired, Bluetooth enabled device with the Message Access Profile (MAP). Not all
Bluetooth enabled devices support MAP, including all iPhones (Apple iOS). Visit
UconnectPhone.com for system and device compatibility information.
2. An active Uconnect Access trial or paid subscription.
3. Accept the “Allow MAP” profile request on your device. (Please refer to device manufacturer
instructions for details).
To Send A Text Message:
1. Push the Uconnect Phone Button
on the steering wheel.
2. Wait for the beep.
3. Say “Text.”
4. Uconnect will prompt you “Say the phone number, or full name and phone type of the contact
you want to send a message to.”
5. Wait for the beep and say a contact that is in your phonebook, or a mobile phone number that
you would like to send the message to.
6. Uconnect will prompt you “Please say the message that you would like to send.” (If you do not
hear this prompt, you may not have an active subscription with Uconnect Access).
ELECTRONICS
85
To Next Page
Loading...
