CHWS PRORAPID - Commissioning Help

21
INSTALLATION MANUAL PRORAPID |
Commissioning help
1. Set language and time
2. Commissioning help / setup wizard
a) select or
b) skip.
The setup wizard guides through the
necessary basic settings in the correct order.
Pressing the “esc“ key takes you back to the
previous setting. With free commissioning
the settings should be made in the following
order:
• Menu 9. Language
• menu 3. Time, Date and Operating
Times.
• menu 4. Settings, all values
• menu 5. Protection Functions (if any
adjustments necessary).
• menu 6. Special Functions (if any
adjustments necessary).
3. In menu operating mode “3.2. Manual”,
test the switch outputs with the
consumers connected and check the
sensor values for plausibility. Then set
to automatic mode.See “ Manual “ on
page 12
The setup wizard can be
accessed in menu 6.12. at
any time.area of application
with the appropriate
permissible temperature
range.
Consider the explanations
for the individual parameters
on the following pages and
check if further settings
are necessary for your
application.
Setup wizard
Would you like to start the setup
wizard?
no
yes