CHWS PRORAPID - General Information

3
INSTALLATION MANUAL PRORAPID |
Instructions For Use
General Information
This instruction manual is a part of the
product, check that it is always supplied
with the CHWS ProRapid DHW generator.
Carefully read the instructions contained
in this chapter as they provide important
information on the usage of the unit.
Keep this manual for future reference if the
CHWS ProRapid DHW generator is sold or
transferred to a dierent owner or leaving
the unit where installed, please make sure
that this manual always accompanies the
CHWS ProRapid DHW generator so as it
can be used for reference by the new owner
or installation expert.
Important: This CHWS ProRapid Hot
water generator has to be used to produce
hot sanitary water, in accordance with its
technical features of performance and
power, by thermal exchange with a heating
water supply (t ≤ 100°C) max.
Any dierent usage for the CHWS ProRapid
Hot water generator is forbidden, do not
clean the CHWS ProRapid Hot water
generator with corrosive or ammable liquids.
The use of electric adapters, extension
cords or socket sets is not recommended.
In case of damages to the electric cord turn
the power o and consult a professionally
qualied technician.
An electric manual is enclosed in the
appliance please observe the following
fundamental rules:
• Do not touch the appliance with parts
of the body which are wet, damp or in
bare feet
• Do not pull the electric wires
• Do not allow children or unqualied
persons to use the appliance
The manufacturer declines any responsibility
for damages caused by neglect of the
appliance or system. If the CHWS ProRapid
hot water generator is not used for long
periods of time, turn o thepower supply
and empty the unit.
Description
The CHWS ProRapid DHW generators is
manufactured in stainless steel and is able
to satisfy high requirements of sanitary hot
water. The automatic system of water mixing
will avoid temperature’ stratication the heat
storage is therefore higher. The external
stainless steel plate exchanger enables easy
maintenance and cleaning.
The system will reduce the potential for
Legionella growth in an eective way by
heating the stored contents and circulating
water through the entirety of the cylinder.