HEAT PUMPS - AIR CONDITIONING - REFRIGERATION - AIR HANDLING - HEAT EXCHANGE - NA 12.65 D
13
Horizontal package air conditionners
HCompact2 HA
Hole for the power supply
Another hole must also be
drilled to connect the hose
to the electric power supply.
Step 2: fasten the frame to the
panel with selfturning screws.
Step 3: insert the hose
through the hole made for
the connection in the electric
panel.
Note: The connection of the
necessary elements for the
adequacy to the handling of
the unit must be performed by
the installer.
Access panel
Step 4: close the access
panel. The outlet is ready for
ducting.
Filters
These units can substitute the fi ltering mesh that the units include
regularly with G4 rating, mounted on the same frame.
Optionally these teams can incorporate, besides the gravimetric fi lter
G4, an creased opacimetric fi lter with F7 rating. For this combination
of fi lters, the fi lter holder profi le is different. It is wider than the standard
in 50 mm
Filter holder profi le
Frame with
gravimetric fi lter
Opacimetric
fi lter rail
Frame with
opacimetric fi lter
Gravimetric
fi lter rail
Filter removal:
These frames with the gravimetric and opacimetric filter can be
extracted easily by both sides.
To Next Page
Loading...
