To Next PageTo Next Page
Need help?Do you have a question about the CID Bio-Science CI-340 and is the answer not in the manual?
General| Model | CI-340 |
|---|---|
| Detector | Silicon Photodiode |
| GPS | Integrated GPS |
| Light Source | LED |
| Resolution (SPAD) | 0.1 SPAD unit |
| Accuracy | ±1 SPAD unit |
| Data Storage | Internal memory, expandable with SD card |
| Display | LCD screen |
| Operating Temperature | 0 to 50°C |
| Measurement Type | Chlorophyll Content (SPAD) |
| Humidity Range | 0-85% relative humidity, non-condensing |
Explains the principle of infrared gas analysis for measuring gases like CO2 and H2O.
Details how IRGA is used to measure photosynthesis rates and related plant parameters.
Describes the CI-340's technical components, airflow path, and measurement process.
Lists and explains the primary components of the CI-340 gas exchange system.
Summarizes key features and advantages of the CI-340 photosynthesis system.
Details the necessary warm-up and acclimation procedures before taking measurements.
Explains the function and usage of the CI-340's keypad for navigation and input.
Describes how to access and manage data files stored within the CI-340's file system.
Guides the user on how to set the instrument's date and time for accurate record-keeping.
Explains the calibration process for the leaf and air temperature sensor.
Details how to calibrate the atmospheric pressure sensor for accurate readings.
Step-by-step guide for calibrating the CO2 zero and span settings.
Step-by-step guide for calibrating the H2O zero and span settings.
Instructions on how to transfer collected data from the CI-340 to a computer.
Explains the process for updating the CI-340's internal software code.
Guides the user through the process of initiating and conducting measurements with the CI-340.
Explains the different measurement modes available on the CI-340.
Defines photosynthesis in the context of plant physiology.
Defines PAR and its measurement by the CI-340 system.
Explains transpiration and its determination using the CI-340.
Provides specifications for the LC-4 small cylinder chamber used with CI-340.
Provides specifications for the LC-5 large cylinder chamber used with CI-340.
Details proper handling, attachment, and care for CI-340 leaf chambers.
Explains how to connect the CI-340 to an external AC power source.
Instructions for safely disconnecting the battery charger and adapter.
Step-by-step instructions for charging the CI-340's Li-ion battery.
Addresses common problems related to the instrument's display not turning on or flickering.
Provides solutions for when the CI-340's keypad keys do not respond correctly.
Offers solutions for fluctuating or deteriorating CO2/H2O readings during measurements.
Details the technical specifications for the CI-340's CO2 analyzer.
Details the technical specifications for the CI-340's H2O analyzer.
Lists the technical specifications for the Photosynthetically Active Radiation (PAR) sensor.
Covers specifications for chamber and leaf temperature measurement sensors.
Information on how to obtain technical assistance and support for the CI-340.
Details on how to contact customer service for sales, upgrades, or repairs.
Directs users to the FAQ section for common questions about the CI-340.
Introduces the CI-510CS module for controlling leaf and air temperature.
Instructions for filling the water reservoir for the CI-510CS temperature control module.
Procedures for draining the water reservoir after using the CI-510CS module.
Guides on how to operate the CI-510CS module for temperature control.
Introduces the CI-301LA module for providing controlled light for photosynthesis measurements.
Instructions for connecting and using the CI-301LA light attachment with the CI-340.
Provides a general overview of the CI-301AD module for controlling CO2 and humidity.
Details how to connect the CI-301AD module to power and the CI-340 analyzer.
Explains the basic operation and handling of the CI-301AD module.
Guides on replacing consumables like soda lime, silica gel, and filters for the CI-301AD.
Introduces the CI-301SR module for measuring soil respiration.
Outlines the steps for setting up and performing soil respiration measurements with the CI-301SR.
Provides instructions for assembling canopy chamber attachments for the CI-340.
Details how to assemble canopy chambers using flexible materials.
Explains assembly for rigid canopy chambers and attaching them to the CI-340.
Guides on performing measurements using the canopy chamber attachment.
Introduces the CI-510CF module for chlorophyll fluorescence measurements.
Instructions for connecting the CI-510CF module to the CI-340 instrument.
Details how to perform fluorescence saturation pulse measurements using the CI-510CF.
Defines CID Bio-Science's warranty coverage and limitations for its manufactured equipment.
