CILICO CT10X - Beeper; LED Indicator

17
1.3 LED Indicator
The LED indicators on CT10X can help the user know about the
current operation status.
COLOR OF LED INDICATOR
MEANING
Green LED on and off quickly
Good Read, with one short beep (high
tone)
Green LED on Every 5s
Indicates the CT10X Scanner in Memory
Mode
Purple, Flashing(On/Off ratio 1:1)
Indicates the CT10X Scanner in Setting
mode
Blue, Flashing (On/Off ratio 1:1)
Indicates the BT is waiting for connection,
the CT10X stores the address of BT
which connects with the last time.
Indicates the CT10X Scanner is out of
range or can not establish connection with
BT, with two short beeps(high-low tone)
Blue, Flashing (On/Off ratio 20ms:3s)
Indicates the CT10X Scanner establish a
BT connection successfully, with two short
beeps (low-high tone).
Indicates the CT10X Scanner reconnect
with BT, with two short beeps (low-high
tone).
Red, Flashing (On/Off ratio 1:1)
Indicates the CT10X Scanner has no
address of BT which connects with before.
The default BT connect interface is HID,
the PIN code is 10010.
1.4 Beeper
The beeper built in CT10X can help the user know about the
current operation status.
BEEPING
MEANING
One long beep, high tone
Power on. If the scanner has no BT
address which could connect with, flashing
red. If the scanner has BT address which
could connect with, flashing blue.
One short beep, high tone
Read barcode, with green LED on and off
quickly
One long beep, low tone
Configuration error, with purple flashing;
Or transmit buffer full, with green LED on
and off quickly
Two short beeps, high tone
Power off.
Two short beeps, low-high tone
Two short beeps, high-low tone
BT connection established, with blue LED
flashing (On/Off ratio 20ms:3s).
BT connection out of range or suspended,
with blue LED flashing (On/Off ratio 1:1).