USER ENVIRONMENT
Operating Temp.
Storage Temp.
Operating Humidity
Storage Humidity
Drop Specifications
Accessories
0 to 50. °C / 32 to 122°F
0 to 50. °C / 32 to 122°F
20-85% ( non-condensing )
20-85% ( non-condensing )
Free fall of 1.5m air drop
Lithium battery, Charger., Data lines
Correct Aiming
Incorrect Aiming
QUICK START
The setting of the CT10X Barcode Scanner can be changed by
reading the setup barcodes contained in this manual. This section
describes the procedure of setting the CT10X Barcode Scanner by
reading the setup barcodes and provides some example for
demonstration.
Step 1: Turn on CT10X Barcode Scanner. It will response with a
long beep(high tone), it's LED shows red and with Intmt
twinkle.
Note: How the CT10X Barcode Scanner establishes a
connection with computer or other compatible device,
please refer to Chapter 2.
Step 2: Enter the Setting Mode. The CT10X Barcode Scanner
will response three beeps (tone descending from high to
low), and its LED indicator will flashing purple.
To Next Page
Loading...