CILICO CT10X - Setting Up Bluetooth Connection

To Next Page

To Previous Page

2.2 Setting up a BT connection

Specify the PIN Code, if you choose "The Default Value 1", the

passkey for setting up a BT connection is 10010; If you choose "The

Default Value 2", the passkey for setting up a BT connection is

40510.

For security concerns, the user can also specify a unique PIN code.

1. Read the "Enter PIN Code" barcode;

2. Read the setting barcodes of parameters' value in APPENDIX

ONE, if the scanner read the setting barcodes 1, 5, 1, 5, 1, 5 in

order, it means the PIN code is 151515.

10010

(*)Default Value 1

40510

Default Value 2

Enter PIN Code

Random PIN Code

Refer to APPENDIX I.

Note: Before the CT10X Scanner connects with the other devices,

the user should pre-set the scanner.

For example: The CT10X Scanner is trying to connect with a host

computer, the setting operation is according to the following steps:

1. Read the "Enter Setup" barcode;

2. Read the "Enable SPP" barcode;

3. Read the "Default Value 1"(PIN code is 10010);

4. Read the "Exit with Save" barcode.

Enter Setup

Exit with Save

Exit without Save