CILICO CT10X - Code25: Standard 25

To Next Page

To Previous Page

Exit with Save

Exit without Save

3.5 Code25: Standard 25

Decide whether or not to enable Standard 25. The CT10X Scanner

defaults enable Standard 25.

（*）

Enable Standard 25

Disable Standard 25

Note: Read the "Disable Standard 25" barcode will make the

scanner can not read the Standard 25 barcode. Thus, if the scanner

can not read the Standard 25 barcode, please trying to read "Enable

Standard 25" to reset.

For Example: Enable Standard 25.

1. Read the "Enter Setup" barcode;

2. Read the "Enable Standard 25" barcode;

3. Read the "Exit with Save" barcode.

Enter Setup