CILICO CT10X - Msi

Exit with Save
Exit without Save
62
3.13 MSI
Decide whether or not to enable MSI. The CT10X Scanner defaults
disable MSI.
Enable MSI
（*）Disable MSI
Note: Read the "Disable MSI" barcode will make the scanner can
not read the MSI barcode. Thus, if the scanner can not read the MSI
barcode, please trying to read "Enable MSI" to reset.
For example: Enable MSI.
1. Read the "Enter Setup" barcode;
2. Read the "Enable MSI" barcode;
3. Read the "Exit with Save" barcode.
Enter Setup