CILICO CT10X - Chapter 3 Symbology Settings

45
Chapter 3 Symbology Settings
In this chapter, a brief on the symbology setting is provided for your
reference.
Contents
3.1 Codabar .................................................................................... 46
3.2 Code25: Industrial 25. ............................................................... 47
3.3 Code25: Interleaved 25. ............................................................ 48
3.4 Code25: Matrix 25. .................................................................... 49
3.5 Code25: Standard 25. ............................................................... 50
3.6 Code 39..................................................................................... 51
3.6.1 Enable/Disable Code 39. .............................................. 51
3.6.2 START/STOP Transmission. ........................................... 51
3.6.3 Checksum Verification. ................................................. 52
3.6.4 Standard/Full ASCII Code 39. .......................................... 53
3.7 Code 93..................................................................................... 54
3.8 Code 128. .................................................................................. 55
3.9 EAN-8........................................................................................ 54
3.9.1 Enable/Disable EAN-8. .................................................... 55
3.9.2 Convert to EAN-13. .......................................................... 56
3.9.3 Checksum Transmission. ................................................. 57
3.10 EAN-13.................................................................................... 58
3.10.1 Enable/Disable EAN-13. ................................................ 58
3.10.2 Convert to ISBN. ............................................................ 58
3.10.3 Checksum Transmission. ............................................... 59
3.11 UPC-A. ..................................................................................... 60
3.11.1 UPC-A Output “0”. .......................................................... 60
3.11.2 UPC-A Checksum Transmission. ................................... 60
3.12 UPC-E. ..................................................................................... 61
3.12.1 Enable/Disable UPC-E. ................................................. 61
3.12.2 UPC-E Checksum Transmission. .................................. 61
3.13 MSI. ........................................................................................ 62