CE318-T Photometer
User Operation Manual
Revision V4.10 October 2021
24
20. Launch a Park scenario in the CU menu. The photometer head will find
its PARK position which is the nadir on the polar angle (head orientated
down).
If the head is pointing to zenith (orientated up), unstrap the sensor head,
reposition it in the opposite sense in the straps and do step 13 again.
Note: Place the spirit level on the robot V-shaped part after the PARK scenario. It
should be perfectly horizontal, if not refer to part 5.2.2.
To Next Page
Loading...
Need help?
General