CipherLab 1662 L - Separator for Date and Time

51
Update
Chapter 1 Understanding the Barcode Scanner
Decoding Data and Time
Year Setup
Date Setup
Time Setup
1) Read the barcode above to apply time or date code separately, and follow steps 2~3.
2) Read the “Decimal Value
” barcode on page 錯誤! 尚未定義書籤。 for the desired
character string. For example:
Year: Read “2”, “0”, “1”, “1” for the year setting as year=2011.
Date: Read “1”, “1”, ”2”, “0” for the date setting as date=Nov.20.
Time: Read “1”, “8”, “5”, “9” for the time setting as time=18:59.
3) Read the “Validate” barcode for each setting on the same page.
1.16.2 SEPARATOR FOR DATE AND TIME
The Date and Time can be split with a pre-selected separator, for example, “/” as
YYYY/MM/DD or “:” as HH:MM:SS
Separator for
Date/Time
*“-”
Separator for
Month/Date
*“/”
Separator for
Hour/Minute
*“:”
1) Read the barcode above to apply separator to date or time separately, and follow
steps 2~3.
2) Read the “
Hexadecimal Value” barcode on page 錯誤! 尚未定義書籤。 for the desired
character string. For example, read “3” and “A” for the separator to split the data with
character [:].