19
Update
Quick Start
List information regarding Driver License
List Page 22
CREATE ONE-SCAN SETUP BARCODES
The fact is most of the scanner parameters require only one read for setting new values.
To facilitate configuring the scanner, you may create One-Scan setup barcodes for use.
The requirements of a One-Scan setup barcode are:
a prefix of the “#@” characters
the six digits of command parameters
a suffix of the “#”character
For example, the scanner needs the reading of three setup barcodes for the command
parameter “109952” to take effect:
Enter Setup
List Page 3
To Next Page
Loading...
