4
8400 Series Mobile Computer Reference Manual
GETTING STARTED
INSERTING BATTERY & MEMORY CARD
For shipping and storage purposes, save the mobile computer and the main battery in
separate packages. This will keep both batteries in good condition for future use.
Note: Any improper handling may reduce the battery life.
1) Unhook the hand strap from the bottom of the mobile computer. Make sure to turn
off the mobile computer.
2) Hold the mobile computer still and press the release button to unlock the battery
cover.
3) Slide off the battery cover.
4) Use your finger to slide the locking plate towards its hinge to unlock the SD card
holder.
5) Flip up the SD card holder.
6) Insert your memory card (microSD or microSDHC) to the SD card holder.
7) Push the SD card holder down.
8) Slide the locking plate away from its hinge to secure the card.
9) Slide the battery pack into the battery compartment at a proper angle (30°~45°) so
that the tabs on the bottom of the battery are hooked in the grooves of the
compartment.
10) Push down the battery and make sure that the battery is snugly fit into the
compartment.
11) Slide the battery cover back onto the mobile computer until it clicks into place.
Note: For a new battery, make sure it is fully charged before use. Always prepare a
spare battery pack, especially when you are on the road.
To Next Page
Loading...
Need help?
General