CipherLab 8400

75
Chapter 3 System Menu
3.11.4 SECURITY
Set or modify security parameters.
 WEP: Wired Equivalent Privacy
 EAP: Extensible Authentication Protocol
 WPA: Wi-Fi Protected Access
Authentication
[1] Open System
[0] Share Key
 Default authentication type
 This requires implementing WEP key.
WEP Menu
WEP Setting
 Enable (For Share Key, it must be enabled!)
 Disable (default)
WEP Key Length
 64 bits
 128 bits (default)
Default Key WEP KEY1
WEP Key Enter WEP Keys 1 ~ 4 in one of the following input data type:
 ASCII (up to 13 characters)
 Hexadecimal (up to 26 characters)
EAP Menu (for associating to Cisco access points)
EAP Setting
 Enable
 Disable (default)
EAP ID Enter a user name (up to 32 characters)
EAP Password Enter a password (up to 32 characters)
WPA Menu (WPA-PSK)
WPA Setting
 Enable
 Disable (default)
WPA2 Setting
 Enable
 Disable (default)
WPA Passphrase Enter a phrase as your password (8 ~ 63 characters)