42
8400 Series Mobile Computer Reference Manual
3.2 SETTINGS
You can change the default settings here.
System Settings
Default Values
Clock Current time
Backlight 20 seconds at level 2, backlight shade enabled
Contrast Level 4
Auto Off 10 minutes
Power On Options Program Resume
Key Click Tone 2
Buzzer Volume High volume level
USB VCOM No. Fixed
USB Charge Current 500 mA
System Password Open access
Font System font
Reset to Default Load factory settings
Reset Reader Restore default reader settings
Upgrade Reader FW Upgrade 2D reader firmware (For maintenance use only)
3.2.1 CLOCK
Set date and time for Real Time Clock. Enter two digits for the year, e.g. 04 for 2004.
3.2.2 BACKLIGHT
Set the backlight duration for the keypad and LCD.
Enter a value between 0 and 9999 (second).
Press the arrow keys (Up) (Down) to adjust the backlight level (4 levels).
Press the (Left) key to adjust the shade effect.
To Next Page
Loading...
Need help?
General