62
8400 Series Mobile Computer Reference Manual
3.8 SD CARD MENU
This submenu is for using the mobile computer equipped with SD card as a removable
disk, as well as for directly accessing files on SD card.
Note: When SD card is present, the card icon will appear flashing while being accessed.
If the mobile computer is preloaded with Batch AG runtime, it will automatically
create two working directories “\AG\IMPORT” and “\AG\EXPORT” on SD card.
3.8.1 RUN AS USB DISK
When the mobile computer is equipped with SD card and connected to your computer via
the USB cable, it can be treated as a removable disk (USB mass storage device) as long
as it is configured properly through programming or via selecting [Run as USB Disk].
Note: (1) The SD card must be properly configured through programming or user menu
before use. (2) Depending on the card capacity, it takes about 30 seconds or
longer for PC to identify 8400 as a removable disk.
3.8.2 ACCESS SD CARD
Edit the file system or format the SD card.
Edit Files
View and edit the file system on SD card.
Format
If the file system is not desired any more, you may format the SD card.
If the capacity is 32 MB or under, the file system will be FAT12.
If the capacity is 32 MB~2 GB, the file system will be FAT16.
If the capacity is larger than 2 GB, the file system will be FAT32.
Warning! The contents on SD card will be wiped out after formatting.
To Next Page
Loading...
Need help?
General