45
Chapter 3 System Menu
3.2.11 SYSTEM PASSWORD
Set a password to control user access to System Menu, Program Manager and Kernel
Menu. The password can be up to eight alphanumeric characters.
Note: The password is case-sensitive. To disable a previous password, enter blank on
the "Input new password" and "Verify password" screens.
3.2.12 RESET TO DEFAULT
Reset system settings to the default values, except for the reader settings.
3.2.13 RESET READER
Reset reader settings to the default values.
3.2.14 UPGRADE READER FW
Upgrade 2D reader firmware if necessary.
To Next Page
Loading...
Need help?
General