5.1. READERCONFIG PROFILE MANAGMENT
The mobile computer is capable of reading printed barcodes. The reader module can be
either a (laser) 1D reader or a 2D imager. The mobile computer is installed with a
ReaderConfig to configure the scan engine built inside. Use it to create a profile of settings
that best suits your needs.
LAUNCH READERCONFIG
To launch ReaderConfig, please go to App Drawer (All Apps) | ReaderConfig to
open the reader configuration utility.
The main screen of ReaderConfig consists of main menu and a list of profiles, including a
“Default” profile which cannot be deleted. Next to each profile, there is also a profile menu
which includes a set of operations that are specific to the profile.
To Next Page
Loading...
