STEP 22:
Put the motor cover back and secure
4 screws on motor cover to
assemble.
Put the Right & Left console masts
back and secure 4 screws to
assemble.
STEP 23:
To properly tension a new running
belt, using M6 torque wrench (45
kgf-cm) and Allen wrench. Rotating
the tension bolts clockwise until
heard the click of torque wrench.
Start the treadmill and run it at 10
km/hr.
Counting adjusting belt until the belt
maintain centered and it does not
move to one side or another within 5
minutes.
To Next Page
Loading...