9�- MAINTENANCE AND TECHNICAL SERVICE
10�- GUARANTEE
• No returns will be accepted and no unit will be repaired or replaced if it is not ac-
companied by a report indicating the defect detected or the reason for the return.
•The guarantee will be void if the units has been improperly used or the stora-
ge, installation and maintenance instructions listed in this manual have not been
followed.“Improperusage”isdenedasanyoperatingorstorageconditioncon-
trary to the national electrical code or that surpasses the limits indicated in the
technical and environmental features of this manual.
• CIRCUTOR accepts no liability due to the possible damage to the unit or other
parts of the installation, nor will it cover any possible sanctions derived from a pos-
sible failure, improper installation or “improper usage” of the unit. Consequently,
this guarantee does not apply to failures occurring in the following cases:
- Overvoltages and/or electrical disturbances in the supply;
-Water,iftheproductdoesnothavetheappropriateIPclassication;
- Poor ventilation and/or excessive temperatures;
- Improper installation and/or lack of maintenance;
-Buyerrepairsormodicationswithoutthemanufacturer’sauthorisation.
CIRCUTOR
delivery of the units.
CIRCUTOR will repair or replace any defective factory product returned during the guarantee
period.
In the case of any query in relation to device operation or malfunction, please contact the
CIRCUTOR, SA Technical Support Service.
Technical Assistance Service
VialSantJordi,s/n,08232-Viladecavalls(Barcelona)
Tel:902449459(España)/+34937452919(outsideofSpain)
email: sat@circutor.com
The computer MAX 6 and MAX 12 do not require a special maintenance program. In case that
someadjustmentsormaintenancemightbenecessaryitmustbeperformedbydullyqualied
staff and respecting the required safety procedures.
To Next Page
Loading...
Need help?
General
