Need help?Do you have a question about the Circutor Computer SMART III 14 and is the answer not in the manual?
General| Communication | RS-485, Modbus RTU |
|---|---|
| Display | LCD |
| Frequency | 50/60 Hz |
| Protection Degree | IP20 |
| Operating Temperature | -10°C to +55°C |
| Storage Temperature | -25 ... +70 ºC |
| Relative Humidity | 5% to 95% (non-condensing) |
| Standards | IEC 61010-1 |
Essential safety warnings and precautions for handling and installing the device.
Record of modifications made to the manual across different versions.
Explanation of icons and symbols used throughout the instruction manual.
Steps to verify the device upon delivery for completeness and damage.
Introduction to the Computer SMART III, its purpose, and available models.
Essential safety and handling guidelines before and during device installation.
Identification and function of all terminal connections for wiring the device.
Visual guides for various wiring configurations based on connection types.
Initial power-on sequence and the home screen display.
Explanation of key terms like regulator, stages, steps, and programs.
Electrical parameters displayed by the device for different connection types.
How to use the device's keys for navigation and programming.
Understanding the LCD display areas, LEDs, and symbols.
In-depth view of parameters and screens in measurement mode.
Using AutoTest, Step Test, and other testing features.
Configuration and function of digital inputs and relay/digital outputs.
Setting up RS-485 communication using Modbus RTU.
Addressing and mapping of device variables for Modbus communication.
Illustrative example of sending a query and receiving a response via Modbus.
Automatic device configuration for initial setup and parameter discovery.
Configuring current and voltage transformer ratios.
Setting the desired power factor for reactive power compensation.
Adjusting connection/reclosing times and selecting connection types.
Configuring the number of stages, their status, and program parameters.
Adjusting C/K factor and setting the device's voltage level.
Configuring hysteresis, analogue bar, fan, and display options.
Enabling and setting thresholds for various device alarms (voltage, current, temperature, etc.).
Accessing and understanding the informative simulation screen.
Detailed electrical, mechanical, and environmental specifications of the device.
Information on how to contact CIRCUTOR for assistance with operation or malfunctions.
Details on the product's warranty period, coverage, and exclusions.
Declarations of conformity to European directives for safety and EMC.
To Next Page
