Need help?Do you have a question about the Circutor Computer SMART III 6 and is the answer not in the manual?
General| Display | LCD |
|---|---|
| Power consumption | < 5 VA |
| Communication | RS-485 Modbus/RTU |
| Frequency | 50/60 Hz |
| Operating temperature | -10...+50 °C |
| Relative humidity | 5% to 95% (non-condensing) |
| Protection degree | IP20 |
| Storage temperature | -20°C to +70°C |
General safety warnings, dangers, and points requiring attention.
Verifying the device upon reception and its general product features.
Safety advice and recommendations for installation and MV capacitor banks.
Lists and illustrates all device terminal connections.
Illustrates wiring for various connection types.
Instructions for powering on the device.
Explains device operation, definitions, and functions like Plug&Play.
Lists electrical parameters measured for different connection types.
Explains keyboard operations, display elements, and LED indicators.
Describes device operating states (RUN, TEST) and functions.
Details digital inputs, outputs, and communication protocols.
Guides through setup, Plug&Play, and basic parameter configuration.
Configures advanced settings, alarms, fan, voltage trip, comms, and clearing data.
Details electrical specs, measurement circuits, and accuracy.
Covers outputs, interface, comms, environmental, and mechanical specs.
Lists applicable standards and CE conformity information.
Information for contacting technical support for service.
Details the product warranty terms and conditions.
To Next Page
