Circutor CVM-C4 - 5�- Display; 5 �1�- Single-Phase Network Measuring

19
Instruction Manual
CVM-C4
5. DISPLAY
The CVM-C4 has up to 24 display screens depending on the measurement system, see “6.1.1.-
MEASUREMENT SYSTEM".
5.1.- SINGLE-PHASE NETWORK MEASURING
The CVM-C4 has 15 display screens in the single-phase network measurement system, Table 9.
Use the keys and to browse through the different screens.
The display screens can change automatically depending on the time programmed in the section
“6.5.2.- CYCLIC DISPLAY”.
The initial display screen, i.e. the first screen displayed when feeding the device or when exiting the
configuration menu, can be programmed in section “6.5.4.- INITIAL DISPLAY SCREEN”.
Table 9: Display menu: Single-phase network measuring
Display menu: Single-phase network measuring
2200
V
.
Voltage (V / kV)
(1)
5010
A
.
Current (A / kA)
(2)
5000
Hz
.
Frequency (Hz)
(1)
For values of V ≥ 9000, the device automatically switches the units to kV.
(2)
For values of A ≥ 9000, the device automatically switches the units to kA.