Circutor CVM-C4 - 6 �1�- Configuration of the Input; 6�1�1�- Measurement System

34
CVM-C4
Instruction Manual
6.1.- CONFIGURATION OF THE INPUT
Figure 16 shows the input configuration menu from which the measurement system and the primary
and secondary current and voltage are configured.
Measurement system
Primary voltage
Secondary voltage
Primary current
Secondary current
Save conguration
inpt
nEt
n34
.
inpt
pt 1
0380
.
.
V
k
inpt
pt 2
0380
.
.
V
inpt
Ct 1
0005
.
.
A
k
inpt
Ct 2
0005
.
A
SAuE
>3s
>3s
>3s
>3s
>3s
>3s
inpt
nEt
n34
.
inpt
pt 1
0380
.
.
V
inpt
pt 2
0380
.
.
V
inpt
Ct 1
0005
.
.
A
k
inpt
Ct 2
0005
.
A
SAuE
no
Figure 16: Input configuration menu
6.1.1.- MEASUREMENT SYSTEM
In this screen we can configure the measurement system used in the installation.
inpt
nEt
n34
.
>3s
inpt
nEt
n34
.
With a long keystroke (>3s), press to access the value's configuration.
Use the keys and to browse through the different options:
n34, three-phase network measuring with 4-wire connection.
n.33, three-phase network measuring with 3-wire connection.
n.12, single-phase measuring.