Circutor CVM-C4 - 6�5�4�- Initial Display Screen; 6�5�5�- Access Password

48
CVM-C4
Instruction Manual
6.5.4.- INITIAL DISPLAY SCREEN
In this section the initial display screen is configured.
SyS
diSP
U
>3s
SyS
diSp
U
With a long keystroke (>3s), press to access the value's configuration.
Use the keys and to browse through the different options:
U, voltage screen.
i, current screen.
F, frequency screen.
P, power screen.
PF, power factor screen.
EP, energy screen.
With a long keystroke, press to validate the data.
Use the keys and to browse through the menu screens.
6.5.5.- ACCESS PASSWORD
This screen is used to configure the value of the password used to access the configuration menu.
SyS
CodE
0001
>3s
SyS
CodE
0001
With a long keystroke (>3s), press to access the value's configuration.
When the desired value is shown on the screen, press the and keys to skip the digit.
Minimum configuration value: 0
Maximum configuration value: 9999
With a long keystroke, press to validate the data.
Use the keys and to browse through the menu screens.