Circutor CVM-C4 - 6�2�3�- Data Format; 6�2�4�- Save Configuration

39
Instruction Manual
CVM-C4
6.2.3.- DATA FORMAT
This screen is used to configure the data format.
dAtA
n81
.
>3s
dAtA
n81
..
Con1
-
Con1
-
.
With a long keystroke (>3s), press to access the value's configuration.
Use the keys and to browse through the different options:
n.8.1, no parity, 8 data bits, 1 stop bit
E.8.1, even parity, 8 data bits, 1 stop bit
o.8.1odd parity, 8 data bits, 1 stop bit
n.8.2, no parity, 8 data bits, 2 stop bit
With a long keystroke, press to validate the option.
Use the keys and to browse through the menu screens.
6.2.4.- SAVE CONFIGURATION
This screen is used to save the device's configuration.
SAuE
>3s
SAuE
no
With a long keystroke (>3s), press to access the value's configuration.
Use the keys and to browse through the different options:
no, to not save the configuration.
YES, to save the configuration.
With a long keystroke, press to validate the option. The device skips to the main screen of the next
configuration menu.