Cirrus SR22T - Before Starting Engine

Cirrus Design Section 4
SR22T Normal Procedures
P/N 13772-005 4-9P/N 13772-005 4-9
Before Starting Engine
1. Preflight Inspection ...................................................COMPLETED
2. Weight and Balance............................................Verify within limits
3. Emergency Equipment ................................................ON BOARD
4. Passengers ..................................................................... BRIEFED
5. Seats, Seat Belts, and Harnesses .................ADJUST & SECURE
Amplification
• WARNING •
Ensure that the airplane is properly loaded and within the
AFM’s weight and balance limitations prior to takeoff.
• Caution •
Crew seats must be locked in position and control handles
fully down before flight. Ensure seat belt harnesses are not
twisted.
Prior to flight, Verify CAPS handle safety pin is removed and ensure all
the passengers have been fully briefed on smoking, the use of the
oxygen system, seat belts, doors, emergency exits, egress hammer,
and CAPS.
Original Issue