EasyManuals Logo

Cirrus SR22T User Manual

Cirrus SR22T
506 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #240 background imageLoading...
Page #240 background image
7-34 P/N 13772-005
Section 7 Cirrus Design
Systems Description SR22T
Tachometer
Engine speed (RPM) is shown in the upper mid-left corner of the
ENGINE page as both a simulated tachometer and as a digital value.
The tachometer pointer sweeps a scale range from 0 to 3000 RPM in
100 RPM increments. The digital RPM value is displayed in
increments of 10 RPM in white numerals below the gage.
The tachometer receives a speed signal from a magnetic pickup
sensor on the right hand magneto from the Engine Indicating System
via the Engine Airframe Unit.
Exhaust Gas Temperature (EGT)
Exhaust gas temperatures for all six cylinders are displayed in the
Engine Temperature block of the ENGINE page as vertical bars. The
EGT graph is marked from 1000°F to 1800°F in 100°F increments.
The digital EGT value of the cylinder is displayed above the bar in
white numerals. A sensor in the exhaust pipe of each cylinder
measures exhaust gas temperature and provides a voltage signal to
the Engine Airframe Unit which processes and transmits the data to
the Engine Indicating System.
Cylinder Head Temperature (CHT)
Cylinder head temperatures for all six cylinders are displayed in the
Engine Temperature block of the ENGINE page as vertical bars. The
CHT graph is marked from 100°F to 500°F in 100°F increments. The
digital CHT value of the cylinder is displayed above the bar in white
numerals.
A sensor in each cylinder head measures cylinder head temperature
and provides a voltage signal to the Engine Airframe Unit which
processes and transmits the data to the Engine Indicating System.
Turbine Inlet Temperature (TIT)
Turbine in let t emperature fo r the LH a nd R H t urbo chargers is displayed
in the Engine Temperature block of the ENGINE page as vertical bars.
The TIT graph is marked from 1000°F to 1800°F in 100°F increments.
The digital TIT value of the turbine inlet is displayed above the bar in
white numerals.
A sensor in each turbocharger measures turbine inlet temperature and
provides a voltage signal to the Engine Airframe Unit which processes
and transmits the data to the Engine Indicating System. The TIT gage
is used as the primary source to lean fuel mixture.
Original Issue

Table of Contents

Other manuals for Cirrus SR22T

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cirrus SR22T and is the answer not in the manual?

Cirrus SR22T Specifications

General IconGeneral
ManufacturerCirrus Aircraft
EngineContinental TSIO-550-K
Horsepower315 hp
Max Takeoff Weight3, 600 lbs
Service Ceiling25, 000 ft
Cabin Width49 in
Cabin Height50 in
Seating Capacity4
AvionicsCirrus Perspective+ by Garmin
CategorySingle-engine piston aircraft
PropellerHartzell 3-blade composite
Wingspan38 ft 4 in
Length26 ft
Height8 ft 11 in
Maximum Cruise Speed213 KTAS
Fuel Capacity92 gallons
Stall Speed64 knots
Safety FeaturesCirrus Airframe Parachute System (CAPS)
Cruise Speed183 knots

Related product manuals