Cisco 11503 - CSS Content Services Switch Configuration Guide

Chapter 3 Configuring SSL Certificates and Keys
Associating Certificate and Private Key Files with Names
3-18
Cisco Content Services Switch SSL Configuration Guide
OL-5655-01
The variables are:
• keyname - The name of the RSA key pair association. Enter an unquoted text
string with a maximum of 31 characters.
• filename - The name of the file containing the RSA key pair. Enter a
maximum of 128 characters. To see a list of imported or generated RSA keys,
use the ssl associate rsakey keyname ? command.
For example, to associate the RSA key name myrsakey1 with the imported
rsakey.pem, enter:
(config) # ssl associate rsakey myrsakey1 rsakey.pem
To remove the association with the file, enter:
(config) # no ssl associate rsakey myrsakey1
Note The no form of the command will not function if the associated RSA key pair is
in use by an active SSL proxy list.
Associating a DSA Key Pair with a File
To associate a DSA key pair name with an imported or generated DSA key pair,
use the ssl associate dsakey command. Use the no form of the command to
remove the association with the file.
The syntax for this command is:
ssl associate dsakey keyname filename
The variables are:
• keyname - The name of the DSA key pair association. Enter an unquoted text
string with a maximum of 31 characters.
• filename - The name of the file containing the DSA key pair. Enter a
maximum of 128 characters. To see a list of imported or generated DSA keys,
use the ssl associate dsakey keyname ? command.
For example, to associate the DSA key name mydsakey1 with the imported
dsakey.pem, enter:
(config) # ssl associate dsakey mydsakey1 dsakey.pem

Cisco 11503 - CSS Content Services Switch Specifications

General

Brand	Cisco
Model	11503 - CSS Content Services Switch
Category	Switch
Language	English