ix
Cisco Content Services Switch SSL Configuration Guide
OL-5655-01
Contents
Configuring TCP Virtual Client Connections Timeout Values 6-13
Specifying a TCP SYN Timeout Value for the Virtual Client
Connection
6-13
Specifying a TCP Inactivity Timeout for a Virtual Client Connection 6-14
Specifying the Nagle Algorithm for Client-Side Connections 6-15
Configuring TCP Server-Side Connection Timeout Values on the SSL
Module
6-15
Specifying a TCP SYN Timeout Value for a Server-Side Connection 6-16
Specifying a TCP Inactivity Timeout for a Server-Side Connection 6-17
Specifying the Nagle Algorithm for Server-Side Connections 6-17
Specifying the TCP Buffering for SSL TCP Connections 6-18
Configuring Client Certificates and Keys 6-19
Configuring the RSA Certificate Name 6-20
Configuring the RSA Key Name 6-20
Configuring Diffie Hellman Parameters 6-20
Configuring the DSA Certificate Name 6-21
Configuring the DSA Key Filename 6-21
Configuring CA Certificates for Server Authentication 6-21
Activating and Suspending an SSL Proxy List 6-23
Configuring a Service for SSL Initiation 6-24
Creating an SSL Service 6-25
Configuring the SSL Service Type 6-25
Configuring an IP Address for an SSL Initiation Service 6-25
Adding an SSL Proxy List to an SSL Initiation Service 6-26
Specifying the SSL Module Slot 6-26
Configuring the SSL Initiation Service Keepalive Type 6-27
SSL Session ID Cache Size 6-28
Activating the SSL Service 6-28
Suspending the SSL Service 6-29