Contents
xxxv
Catalyst 3750 Switch Software Configuration Guide
OL-8550-02
Configuring a Rendezvous Point 40-12
Manually Assigning an RP to Multicast Groups 40-13
Configuring Auto-RP 40-14
Configuring PIMv2 BSR 40-19
Using Auto-RP and a BSR 40-23
Monitoring the RP Mapping Information 40-24
Troubleshooting PIMv1 and PIMv2 Interoperability Problems 40-24
Configuring Advanced PIM Features 40-24
Understanding PIM Shared Tree and Source Tree 40-24
Delaying the Use of PIM Shortest-Path Tree 40-26
Modifying the PIM Router-Query Message Interval 40-27
Configuring Optional IGMP Features 40-28
Default IGMP Configuration 40-28
Configuring the Switch as a Member of a Group 40-28
Controlling Access to IP Multicast Groups 40-29
Changing the IGMP Version 40-30
Modifying the IGMP Host-Query Message Interval 40-31
Changing the IGMP Query Timeout for IGMPv2 40-31
Changing the Maximum Query Response Time for IGMPv2 40-32
Configuring the Switch as a Statically Connected Member 40-33
Configuring Optional Multicast Routing Features 40-33
Enabling CGMP Server Support 40-34
Configuring sdr Listener Support 40-35
Enabling sdr Listener Support 40-35
Limiting How Long an sdr Cache Entry Exists 40-35
Configuring an IP Multicast Boundary 40-36
Configuring Basic DVMRP Interoperability Features 40-38
Configuring DVMRP Interoperability 40-38
Configuring a DVMRP Tunnel 40-40
Advertising Network 0.0.0.0 to DVMRP Neighbors 40-42
Responding to mrinfo Requests 40-43
Configuring Advanced DVMRP Interoperability Features 40-43
Enabling DVMRP Unicast Routing 40-43
Rejecting a DVMRP Nonpruning Neighbor 40-44
To Next Page
Loading...
Need help?
General
