Contents
xxxvi
Catalyst 3750 Switch Software Configuration Guide
OL-8550-02
Controlling Route Exchanges 40-47
Limiting the Number of DVMRP Routes Advertised 40-47
Changing the DVMRP Route Threshold 40-47
Configuring a DVMRP Summary Address 40-48
Disabling DVMRP Autosummarization 40-50
Adding a Metric Offset to the DVMRP Route 40-50
Monitoring and Maintaining IP Multicast Routing 40-51
Clearing Caches, Tables, and Databases 40-51
Displaying System and Network Statistics 40-52
Monitoring IP Multicast Routing 40-53
CHAPTER
41 Configuring MSDP 41-1
Understanding MSDP 41-1
MSDP Operation 41-2
MSDP Benefits 41-3
Configuring MSDP 41-4
Default MSDP Configuration 41-4
Configuring a Default MSDP Peer 41-4
Caching Source-Active State 41-6
Requesting Source Information from an MSDP Peer 41-8
Controlling Source Information that Your Switch Originates 41-9
Redistributing Sources 41-9
Filtering Source-Active Request Messages 41-11
Controlling Source Information that Your Switch Forwards 41-12
Using a Filter 41-12
Using TTL to Limit the Multicast Data Sent in SA Messages 41-14
Controlling Source Information that Your Switch Receives 41-14
Configuring an MSDP Mesh Group 41-16
Shutting Down an MSDP Peer 41-16
Including a Bordering PIM Dense-Mode Region in MSDP 41-17
Configuring an Originating Address other than the RP Address 41-18
Monitoring and Maintaining MSDP 41-19
CHAPTER
42 Configuring Fallback Bridging 42-1
Understanding Fallback Bridging 42-1
Fallback Bridging Overview 42-1
Fallback Bridging and Switch Stacks 42-3
To Next Page
Loading...
Need help?
General
