Cisco 3845 - Security Bundle Router User Manual

2-70
Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide
OL-23408-01
Chapter 2 Messages and Recovery Procedures
SW_VLAN Messages
reported problems. If you still need assistance, open a case with the TAC, or provide your Cisco
technical support representative with your information. For more information about these online tools
and about contacting Cisco, see the “Error Message Traceback Reports” section on page 1-5.
Error Message SW_VLAN-4-BAD_STARTUP_VLAN_CONFIG_FILE: Failed to configure VLAN from
startup-config. Fallback to use VLAN configuration file from non-volatile memory.
Explanation
The VLAN software did not use the VLAN configuration from the startup-configuration
file. It will use the binary VLAN configuration file in NVRAM.
Recommended Action No action is required.
Error Message SW_VLAN-4-BAD_VLAN_CONFIGURATION_FILE: VLAN configuration file
contained incorrect verification word [hex].
Explanation
The VLAN configuration file read by the VLAN manager did not begin with the correct
value. The VLAN configuration file is invalid, and it has been rejected. [hex] is the incorrect
verification value.
Recommended Action Find out more about the error by using the show tech-support privileged EXEC
command. Copy the message exactly as it appears on the console or in the system log. Research and
attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to look for similar
reported problems. If you still need assistance, open a case with the TAC, or provide your Cisco
technical support representative with your information. For more information about these online tools
and about contacting Cisco, see the “Error Message Traceback Reports” section on page 1-5.
Error Message SW_VLAN-4-BAD_VLAN_CONFIGURATION_FILE_VERSION: VLAN configuration
file contained unknown file version [dec].
Explanation
The VLAN configuration file read by the VLAN manager contained an unrecognized
file version number, which might mean an attempt to regress to an older version of the VLAN
manager software. [dec] is the file version number.
Recommended Action Find out more about the error by using the show tech-support privileged EXEC
command. Copy the message exactly as it appears on the console or in the system log. Research and
attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to look for similar
reported problems. If you still need assistance, open a case with the TAC, or provide your Cisco
technical support representative with your information. For more information about these online tools
and about contacting Cisco, see the “Error Message Traceback Reports” section on page 1-5.
Error Message SW_VLAN-4-BAD_VLAN_TIMER_ACTIVE_VALUE: Encountered incorrect VLAN
timer active value [chars].
Explanation
Because of a software error, a VLAN timer was detected as active when it should have
been inactive or as inactive when it should have been active. [chars] is the VLAN timer active value.
Recommended Action Copy the message exactly as it appears on the console or in the system log.
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still need assistance, open a case with the TAC, or provide

Cisco 3845 - Security Bundle Router Specifications

General

Brand	Cisco
Model	3845 - Security Bundle Router
Category	Switch
Language	English