Cisco 3845 - Security Bundle Router User Manual

2-74
Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide
OL-23408-01
Chapter 2 Messages and Recovery Procedures
UDLD Messages
Error Message TCAMMGR-3-MOVE_ERROR: cam entry move from index [int] to index [int]
failed.
Explanation
A CAM entry could not be moved from one index to another. [int] is the index value.
Recommended Action Copy the message exactly as it appears on the console or in the system log.
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still need assistance, open a case with the TAC, or provide
your Cisco technical support representative with your information. For more information about these
online tools and about contacting Cisco, see the “Error Message Traceback Reports” section on
page 1-5.
Error Message TCAMMGR-3-REGION_ERROR: cam region [dec] is invalid.
Explanation
The CAM region is not valid. [dec] is the region.
Recommended Action Copy the message exactly as it appears on the console or in the system log.
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still need assistance, open a case with the TAC, or provide
your Cisco technical support representative with your information. For more information about these
online tools and about contacting Cisco, see the “Error Message Traceback Reports” section on
page 1-5.
Error Message TCAMMGR-3-REGMASK_ERROR: invalid cam region [dec] mask [dec] pair.
Explanation
A caller attempted to install an entry with an invalid mask for the region. Only a
predetermined set of masks is allowed in a region. The first [dec] is the region, and the second [dec]
is the mask.
Recommended Action Copy the message exactly as it appears on the console or in the system log.
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still need assistance, open a case with the TAC, or provide
your Cisco technical support representative with your information. For more information about these
online tools and about contacting Cisco, see the “Error Message Traceback Reports” section on
page 1-5.
UDLD Messages
Error Message UDLD-0-STOPPED:UDLD process stopped:[chars].
Explanation
The UniDirectional Link Detection (UDLD) process stopped because it cannot read the
unique system identifier that is being used by UDLD. The system identifier is used to identify the
device that is sending the UDLD packets. [chars] is the UDLD process name.
Recommended Action Reload the switch by using the reload privileged EXEC command. If the
problem persists, copy the message exactly as it appears on the console or in the system log.
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still need assistance, open a case with the TAC, or provide

Cisco 3845 - Security Bundle Router Specifications

General

Brand	Cisco
Model	3845 - Security Bundle Router
Category	Switch
Language	English