EasyManuals Logo

Cisco 4221 ISR User Manual

Cisco 4221 ISR
230 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #170 background imageLoading...
Page #170 background image
6-18
Hardware Installation Guide for Cisco 4000 Series Integrated Services Routers
OL-32185-02
Chapter 6 Install and Upgrade Internal Modules and FRUs
Overview of the SSD Carrier Card NIM (NIM-SSD)
Step 3 To remove the SSD one at a time, pull the two tabs on the front of each SSD as shown in Figure 6-12.
Step 4 Rotate the SSD card slot cover up and place it over the SSDs.
Step 5 Tighten the captive fasteners on the SSD card slot cover.
Figure 6-12 Pulling Out the Solid State Drives
347344
11
1 Carrier card slot cover

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco 4221 ISR and is the answer not in the manual?

Cisco 4221 ISR Specifications

General IconGeneral
Form FactorRack-mountable
WAN Ports2
LAN Ports2
RAM4 GB
Flash Memory4 GB
Product TypeRouter
Total Number of Ports4
Number of Network (RJ-45) Ports4
Number of Total Expansion Slots3
Expansion Slot TypeNIM, ISC
Number of NIM Slots2
Number of ISC Slots1
ManageableYes
Power SupplyInternal
Redundant Power SupplyNo
Authentication MethodRADIUS, TACACS+
Compliant StandardsIEEE 802.3, IEEE 802.3u, IEEE 802.3ab
Operating Temperature32°F to 104°F (0°C to 40°C)
Height1.75 in
Encryption AlgorithmAES, 3DES
Dimensions (W x D x H)1.75 x 13.5 x 1.73 inches
Operating Humidity5 to 95% (noncondensing)

Related product manuals