EasyManuals Logo

Cisco 4221 ISR User Manual

Cisco 4221 ISR
230 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #76 background imageLoading...
Page #76 background image
2-6
Hardware Installation Guide for the Cisco 4000 Series Integrated Services Router
OL-32185-02
Chapter 2 Cisco 4000 Series ISRs Preinstallation
Safety Recommendations
If you remove the chassis cover, put it in a safe place.
Keep tools and chassis components away from walk areas.
Do not wear loose clothing that could get caught in the chassis. Fasten your tie or scarf and roll up
your sleeves.
Wear safety glasses when working under conditions that might be hazardous to your eyes.
Do not perform any action that creates a hazard to people or makes the equipment unsafe.
Safety with Electricity
Warning
This unit might have more than one power supply connection. All connections must be removed
to de-energize the unit.
Statement 1028
Warning
Do not work on the system or connect or disconnect cables during periods of lightning activity.
Statement 1001
Warning
Read the installation instructions before connecting the system to the power source.
Statement
1004
Warning
The covers are an integral part of the safety design of the product. Do not operate the unit
without the covers installed.
Statement 1077
Follow these guidelines when working on equipment powered by electricity:
Locate the emergency power-off switch in the room in which you are working. If an electrical
accident occurs, you can quickly turn off the power.
Disconnect all power before doing the following:
Installing or removing a chassis
Working near power supplies
Look carefully for possible hazards in your work area, such as moist floors, ungrounded power
extension cables, frayed power cords, and missing safety grounds.
Do not work alone if hazardous conditions exist.
Never assume that power is disconnected from a circuit. Always check.
Never open the enclosure of the internal power supply.
If an electrical accident occurs, proceed as follows:
Use caution; do not become a victim yourself.
Turn off power to the device.
If possible, send another person to get medical aid. Otherwise, assess the condition of the victim
and then call for help.
Determine if the person needs rescue breathing or external cardiac compressions; then take
appropriate action.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco 4221 ISR and is the answer not in the manual?

Cisco 4221 ISR Specifications

General IconGeneral
Form FactorRack-mountable
WAN Ports2
LAN Ports2
RAM4 GB
Flash Memory4 GB
Product TypeRouter
Total Number of Ports4
Number of Network (RJ-45) Ports4
Number of Total Expansion Slots3
Expansion Slot TypeNIM, ISC
Number of NIM Slots2
Number of ISC Slots1
ManageableYes
Power SupplyInternal
Redundant Power SupplyNo
Authentication MethodRADIUS, TACACS+
Compliant StandardsIEEE 802.3, IEEE 802.3u, IEEE 802.3ab
Operating Temperature32°F to 104°F (0°C to 40°C)
Height1.75 in
Encryption AlgorithmAES, 3DES
Dimensions (W x D x H)1.75 x 13.5 x 1.73 inches
Operating Humidity5 to 95% (noncondensing)

Related product manuals