Name: Cisco 4351 ISR
Brand: Cisco
Rating: 5 (1 reviews)

To Next Page

To Previous Page

6-29

Hardware Installation Guide for Cisco 4000 Series Integrated Services Routers

OL-32185-02

Chapter 6 Install and Upgrade Internal Modules and FRUs

Install and Remove NIMs and SM-Xs on Cisco 4000 Series ISRs

Figure 6-23 Install a DIMM

Step 8 Replace the chassis cover. See the “Remove and Replace the Chassis Cover” section on page 6-4.

Install and Remove NIMs and SM-Xs on Cisco 4000 Series

ISRs

Network Interface Modules (NIMs), Service Modules (SM-Xs), and Cisco E-Series Server Modules plug

into the various slots on the motherboard. SM-Xs are sold as spare parts with labels that identify the

SM-X type. See the following sections for SM-X installation tasks:

Note The procedures in this section apply to NIMs, SM-Xs, and Cisco E-Series Server modules.

• Software Requirement for SM-Xs

• Locate SM-X or NIM

• Remove SM-X or NIM

• Install SM-X

• Verify SM-X Installation

Caution Always wear an ESD-preventive wrist strap and ensure that it makes good contact with your skin when

you remove or install an SM-X. Connect the equipment end of the wrist strap to the metal part of the

chassis.

250946

Questions and Answers:

Need help?

Do you have a question about the Cisco 4351 ISR and is the answer not in the manual?

Cisco 4351 ISR Specifications

General