Name: Cisco 4351 ISR
Brand: Cisco
Rating: 5 (1 reviews)

To Next Page

To Previous Page

6-70

Hardware Installation Guide for Cisco 4000 Series Integrated Services Routers

OL-32185-02

Chapter 6 Install and Upgrade Internal Modules and FRUs

Install and Remove an SSD mSATA Storage Device

Step 6 Replace the chassis cover. See “Remove and Replace the Chassis Cover” section on page 6-4.

Remove the SSD mSATA Storage Device

To remove the SSD mSATA storage device:

Step 1 Read the “Safety Warnings” section on page 6-2 and disconnect the power supply before you replace any

module.

Step 2 Remove the chassis cover. For instructions on removing the chassis cover, see “Remove and Replace the

Chassis Cover” section on page 6-4.

Step 3 Unscrew the screws that attach the SSD mSATA storage device to the chassis. See Figure 6-48.

Step 4 The card should popup once the screws are removed.

Step 5 Install a new SSD mSATA memory device if needed. See Install the SSD mSATA Storage Device,

page 6-69.

Step 6 Replace the chassis cover. See “Remove and Replace the Chassis Cover” section on page 6-4.

1 Supplied screw 2 Supplied screw

3 Flash memory card 4 SSD mSATA storage device

5 Flash memory card connector 6 SSD mSATA connector

Questions and Answers:

Need help?

Do you have a question about the Cisco 4351 ISR and is the answer not in the manual?

Cisco 4351 ISR Specifications

General